Monday, 29 April 2019

At Wilton house ....

A visit has been made to check and review security at the house....
Man in Coat: OK then you have my recommendations on improvements in security
Officer: yes thanks, we will put them into action immediately, starting with increased patrols round the perimeter...

3 comments:

  1. Just read my way back through this blog for about 20 posts, and quite enjoying the narrative. All you need is Inspector Foyle!
    Cheers,
    Mike

    ReplyDelete
  2. A visit from an important person on the cards ?

    ReplyDelete
  3. You can access a router’s configuration page using the default IP address of a router. This is usually set by the Manufacturer. The commonly used ones are 192.168.1.1 (Linksys), 10.0.11 (Apple) and 192.168.0.1 (D-link, Netgear, etc). 192.168.0.1 follow this link to configure and set up your wireless router for use Connect the router to a desktop or laptop via an Ethernet cable. For this to work, you might require LAN drivers pre-installed.

    ReplyDelete